add credit based mux window

PROTOCOL.md

@@ -140,8 +140,16 @@ Magic     : u8       # 0x01 = control session, 0x02 = worker conn
 RandLen   : VarInt    # 8 ≤ RandLen ≤ 64
 Rand      : Bytes[RandLen]   # cryptographically random
 Timestamp : I64       # client's epoch milliseconds
+Flags     : VarInt    # feature flags; bit 0x01 (STREAM_FC) MUST be set
+RecvWindow: VarInt    # client's per-stream receive window, bytes (§7.3)
 ```
 
+`Flags` is a bitfield of features. Bit `0x01` (STREAM_FC) declares
+**per-stream flow control** (§7.3) and is mandatory: `RecvWindow` advertises
+the client's per-stream receive window in bytes and must be positive. The hub
+closes the connection if the flag is missing, `RecvWindow` is absent or
+non-positive, or the fields are malformed.
+
 The hub:
 
 1. Decrypts frame 1 with Phase A.
@@ -158,9 +166,13 @@ frame (both directions) is Phase B, counters reset to 0.
 The hub then sends one Phase-B frame to confirm success:
 
 ```
-SessionReady : payload = [ 0x00 ]
+SessionReady : payload = [ 0x00, Flags: VarInt, RecvWindow: VarInt ]
 ```
 
+The hub echoes the accepted flags (STREAM_FC set) followed by its own
+per-stream receive window. A client must reject a SessionReady without the
+STREAM_FC flag or without a positive window (an unsupported hub).
+
 A hub that rejects the session simply closes the TCP connection (optionally
 after a Phase-B `Error` frame, §6). After `SessionReady`:
 
@@ -258,6 +270,7 @@ Data      : Bytes[...]     # remainder of the frame payload
 | `0x01` | DATA | both  | raw tunneled bytes for the stream. |
 | `0x02` | FIN  | both  | *(empty)* — graceful close of the stream (both directions). This is the "disconnect" the hub sends when the player leaves. |
 | `0x03` | RST  | both  | *(optional 1 byte reason)* — abnormal close (e.g. CID unknown/expired, destination dial failed). |
+| `0x04` | WND  | both  | `Delta: VarInt` — flow-control credit grant (§7.3). |
 
 There is no explicit SYN-ACK: success is implied by the hub forwarding the
 buffered Handshake as the stream's first `DATA`; failure is an `RST`.
@@ -294,11 +307,33 @@ configurable, `1..8`). To place a new stream:
    closes the destination. When the destination closes, the client sends `FIN`;
    the hub closes the player socket. `RST` is treated the same way (hard close).
 
-Data on a worker conn is subject to that TCP connection's back-pressure. Each
+Data on a worker conn is subject to that TCP connection's back-pressure for
-stream has a bounded outbound queue on the receiving side; overflow resets the
+its **aggregate** bandwidth; *per-stream* fairness is governed by the credit
-stream (`RST`). (This is a deliberate simplification — no per-stream credit
+windows of §7.3.
-windows — acceptable for the interactive, low-throughput Minecraft handshake +
+
-gameplay traffic pattern.)
+### 7.3 Per-stream flow control
+
+Every stream carries an independent credit window per direction:
+
+* Each side advertised its **receive window** W (bytes) at session setup. A
+  sender may have at most W un-credited DATA bytes outstanding per stream; the
+  initial budget is W, spent as DATA is sent (`Data` length only — SYN/FIN/RST
+  frames are free) starting with the very first DATA on the stream (including
+  the hub's forwarded handshake).
+* The receiver returns credit with `WND(Delta)` once bytes are **delivered to
+  the terminal socket** (written to the player / destination connection), not
+  when they are merely buffered. Receivers should batch grants (the reference
+  implementations send one `WND` per W/2 bytes consumed).
+* A sender whose window is exhausted pauses reading **that stream's source
+  socket only**; the shared worker conn is never paused because of a single
+  stream. A receiver that observes more than W un-credited bytes on a stream
+  may reset it (`RST`) as a protocol violation.
+* Senders should also cap individual DATA payloads (the reference
+  implementations use 32 KiB) so one stream cannot monopolize the link for a
+  full 1-MiB frame.
+
+Both windows may differ (each side enforces the one its peer advertised).
+`Delta` must be positive; a `WND` for an unknown stream id is ignored.
 
 ## 8. HAProxy protocol v2 (optional)
 
@@ -327,10 +362,14 @@ big-endian.
   "listen": "0.0.0.0:25565",
   "psk": "change-me",
   "timestampWindowMs": 30000,
-  "pendingTimeoutMs": 10000
+  "pendingTimeoutMs": 10000,
+  "streamWindowBytes": 262144
 }
 ```
 
+`streamWindowBytes` (optional, default 262144, clamped to [32768, 8388608]) is
+the hub's advertised per-stream receive window (§7.3).
+
 ### 9.2 Client — JSON
 
 ```json
@@ -339,12 +378,16 @@ big-endian.
   "psk": "change-me",
   "maxConn": 4,
   "pingIntervalMs": 20000,
+  "streamWindowBytes": 262144,
   "mappings": [
     { "pattern": "mc\\.example\\.com", "destination": "127.0.0.1:25566", "proxyProtocol": true }
   ]
 }
 ```
 
+`streamWindowBytes` (optional, default 262144, clamped to [32768, 8388608]) is
+the client's advertised per-stream receive window (§7.3).
+
 Each `pattern` is a regular expression (§5.1) matched against the whole
 normalized player hostname, case-insensitively. Escape literal dots (`mc\.example\.com`,
 which is `mc\\.example\\.com` in JSON); an unescaped `.` matches any character.
@@ -369,4 +412,8 @@ subdomain or `(alpha|beta)\.mc\.net` for a fixed set.
 | max frame payload | 1 MiB |
 | saturation threshold | active streams `> 8` |
 | max worker conns | `max_conn ∈ [1,8]` |
+| feature flag: per-stream flow control | `0x01` |
+| stream window default / bounds | 256 KiB, clamped to [32 KiB, 8 MiB] |
+| WND grant batching (reference) | one grant per window/2 consumed |
+| DATA chunk cap (reference) | 32 KiB |
 ```

README.md

@@ -202,7 +202,9 @@ forwarding and case-insensitive matching, regex wildcard pattern routing,
 multi-megabyte transfers, concurrent
 streams spreading across multiple worker connections, HAProxy v2 source-address
 propagation, player- and destination-initiated disconnect propagation, wrong-PSK
-rejection, and dropping of unmatched hostnames. The Go and Java crypto layers are
+rejection, dropping of unmatched hostnames, stream isolation under a slow
+player and under a slow destination (no head-of-line blocking), and rejection
+of pre-flow-control peers. The Go and Java crypto layers are
 independently pinned to the same SHA3-224 test vector so they cannot silently
 drift apart.
 
@@ -212,10 +214,12 @@ drift apart.
   ChaCha20-encrypted (no AEAD tag) to minimize overhead. This protects against
   casual sniffing, not a determined active attacker (see the note at the top of
   [PROTOCOL.md](PROTOCOL.md) and [docs/architecture.md](docs/architecture.md) §8).
-* **No per-stream flow control.** Multiplexing relies on TCP back-pressure per
+* **Per-stream flow control.** Each stream has credit-based windows in both
-  worker connection, so one very slow stream can head-of-line-block others on
+  directions (windows exchanged at session setup, default 256 KiB), so a slow
-  the same connection. Raising `maxConn` spreads load. Fine for interactive
+  player or slow destination jams only its own stream at a bounded buffer — no
-  Minecraft traffic; not a general-purpose high-throughput mux.
+  application-level head-of-line blocking between streams. What remains is
+  TCP-level HOL (packet loss stalls a whole worker connection briefly);
+  raising `maxConn` spreads that.
 * **Single hub event loop.** The hub deploys one Vert.x verticle, so all state
   is confined to one event loop (no locking). Throughput is bounded by one core;
   ample for hundreds of players, not designed for tens of thousands.

client/client.go

@@ -24,6 +24,8 @@ type Client struct {
 	mappings map[string]Mapping // normalized pattern -> mapping
 	pool     *WorkerPool
 
+	streamWnd int // our advertised per-stream receive window (bytes)
+
 	mu   sync.Mutex
 	ctrl *wire.FramedConn
 }
@@ -44,16 +46,32 @@ func New(cfg *Config) *Client {
 	for _, m := range cfg.Mappings {
 		c.mappings[NormalizeAddress(m.Pattern)] = m
 	}
+	c.streamWnd = clampWindow(cfg.StreamWindowBytes)
 	c.pool = newWorkerPool(c, cfg.MaxConn)
 	return c
 }
 
+func clampWindow(w int) int {
+	if w <= 0 {
+		return DefaultStreamWindow
+	}
+	if w < MinStreamWindow {
+		return MinStreamWindow
+	}
+	if w > MaxStreamWindow {
+		return MaxStreamWindow
+	}
+	return w
+}
+
 // dialSession opens a TCP connection, performs the Intent-17 handshake, the
-// Phase-A rekey, and reads SessionReady, returning an established frame conn.
+// Phase-A rekey, and reads SessionReady, returning an established frame conn
-func (c *Client) dialSession(magic byte) (*wire.FramedConn, error) {
+// and the hub's advertised per-stream receive window. Per-stream flow control
+// is mandatory: a hub that does not echo the STREAM_FC flag is rejected.
+func (c *Client) dialSession(magic byte) (fc *wire.FramedConn, peerWnd int, err error) {
 	conn, err := net.DialTimeout("tcp", c.cfg.Server, 10*time.Second)
 	if err != nil {
-		return nil, err
+		return nil, 0, err
 	}
 	if tcp, ok := conn.(*net.TCPConn); ok {
 		_ = tcp.SetNoDelay(true)
@@ -68,24 +86,26 @@ func (c *Client) dialSession(magic byte) (*wire.FramedConn, error) {
 	// 1. plaintext Minecraft Handshake, Intent 17, address = hex(SHA3-224(PSK)).
 	hs := wire.BuildHandshake(ProtocolVersion, c.pskAddr, c.serverPort, IntentRedapricot)
 	if _, err := conn.Write(hs); err != nil {
-		return nil, err
+		return nil, 0, err
 	}
 
 	// 2. Phase-A ciphers derived from the PSK.
-	fc := wire.NewFramedConn(conn,
+	fc = wire.NewFramedConn(conn,
 		wire.CipherFor(c.pskBytes, wire.DirS2C), // in: server -> client
 		wire.CipherFor(c.pskBytes, wire.DirC2S), // out: client -> server
 	)
 
-	// 3. Rekey frame (Phase A).
+	// 3. Rekey frame (Phase A), including the mandatory feature flags and our
+	// per-stream receive window.
 	rnd := make([]byte, 16)
 	if _, err := crand.Read(rnd); err != nil {
-		return nil, err
+		return nil, 0, err
 	}
 	ts := time.Now().UnixMilli()
-	rekeyMsg := wire.NewWriter().U8(magic).VarInt(len(rnd)).Bytes(rnd).I64(ts).Out()
+	rekeyMsg := wire.NewWriter().U8(magic).VarInt(len(rnd)).Bytes(rnd).I64(ts).
+		VarInt(FlagStreamFC).VarInt(c.streamWnd).Out()
 	if err := fc.WriteFrame(rekeyMsg); err != nil {
-		return nil, err
+		return nil, 0, err
 	}
 
 	// 4. Switch to Phase-B ciphers: REKEY = Rand || Timestamp(I64 BE).
@@ -99,16 +119,26 @@ func (c *Client) dialSession(magic byte) (*wire.FramedConn, error) {
 		wire.CipherFor(rekey, wire.DirC2S),
 	)
 
-	// 5. SessionReady.
+	// 5. SessionReady: the type byte followed by the hub's accepted flags and
+	// its per-stream receive window. Both are required.
 	payload, err := fc.ReadFrame()
 	if err != nil {
-		return nil, err
+		return nil, 0, err
 	}
 	if len(payload) < 1 || payload[0] != CtlSessionReady {
-		return nil, fmt.Errorf("expected SessionReady, got %v", payload)
+		return nil, 0, fmt.Errorf("expected SessionReady, got %v", payload)
+	}
+	r := wire.NewReader(payload[1:])
+	flags, ferr := r.VarInt()
+	hubWnd, werr := r.VarInt()
+	if ferr != nil || werr != nil || flags&FlagStreamFC == 0 || hubWnd <= 0 {
+		return nil, 0, fmt.Errorf("hub did not accept per-stream flow control (unsupported hub version?)")
+	}
+	if hubWnd > MaxStreamWindow {
+		hubWnd = MaxStreamWindow
 	}
 	ok = true
-	return fc, nil
+	return fc, hubWnd, nil
 }
 
 // Start establishes the control session and registers all patterns. It returns
@@ -119,7 +149,7 @@ func (c *Client) Start(ctx context.Context) error {
 }
 
 func (c *Client) connectControl(ctx context.Context) error {
-	fc, err := c.dialSession(MagicControl)
+	fc, _, err := c.dialSession(MagicControl)
 	if err != nil {
 		return fmt.Errorf("control connect: %w", err)
 	}
@@ -233,6 +263,7 @@ func (c *Client) handleControlRequest(cid []byte, pattern, ip string, port int,
 	st := newStream(wc, sid, cid, mapping, ip, port)
 	wc.registerStream(sid, st)
 	wc.sendSyn(sid, cid)
+	go st.writeLoop()
 	go st.run()
 }
 

client/config.example.json

@@ -3,6 +3,7 @@
   "psk": "change-me-to-a-long-random-passphrase",
   "maxConn": 4,
   "pingIntervalMs": 20000,
+  "streamWindowBytes": 262144,
   "mappings": [
     {
       "pattern": "mc\\.example\\.com",

client/config.go

@@ -29,10 +29,24 @@ const (
 	MuxData = 0x01
 	MuxFin  = 0x02
 	MuxRst  = 0x03
+	MuxWnd  = 0x04
 
 	FrameError = 0x7F
 
 	SaturationThreshold = 8
+
+	// Session-establishment feature flags (trailing VarInt on the Rekey message).
+	FlagStreamFC = 0x01
+
+	// Per-stream flow-control window bounds (bytes). The advertised window is the
+	// receiver's promise of how much un-credited DATA it will buffer per stream.
+	DefaultStreamWindow = 256 * 1024
+	MinStreamWindow     = 32 * 1024
+	MaxStreamWindow     = 8 << 20
+
+	// DataChunkSize caps a single DATA frame's payload so no stream monopolizes
+	// the shared worker connection for long.
+	DataChunkSize = 32 * 1024
 )
 
 // Mapping routes a registered pattern to a real destination.
@@ -44,11 +58,12 @@ type Mapping struct {
 
 // Config is the client configuration (PROTOCOL.md §9.2).
 type Config struct {
-	Server         string    `json:"server"`
+	Server            string    `json:"server"`
-	PSK            string    `json:"psk"`
+	PSK               string    `json:"psk"`
-	MaxConn        int       `json:"maxConn"`
+	MaxConn           int       `json:"maxConn"`
-	PingIntervalMs int       `json:"pingIntervalMs"`
+	PingIntervalMs    int       `json:"pingIntervalMs"`
-	Mappings       []Mapping `json:"mappings"`
+	StreamWindowBytes int       `json:"streamWindowBytes"` // per-stream receive window; 0 = default
+	Mappings          []Mapping `json:"mappings"`
 }
 
 // LoadConfig reads and validates a JSON config file.

client/worker.go

@@ -55,18 +55,21 @@ func (p *WorkerPool) Allocate() (*WorkerConn, int, error) {
 }
 
 func (p *WorkerPool) dialWorker() (*WorkerConn, error) {
-	fc, err := p.client.dialSession(MagicWorker)
+	fc, peerWnd, err := p.client.dialSession(MagicWorker)
 	if err != nil {
 		return nil, err
 	}
 	wc := &WorkerConn{
-		pool:    p,
+		pool:        p,
-		fc:      fc,
+		fc:          fc,
-		streams: make(map[int]*Stream),
+		sendWndInit: peerWnd,
-		nextSid: 1,
+		recvWndInit: p.client.streamWnd,
+		streams:     make(map[int]*Stream),
+		nextSid:     1,
 	}
 	go wc.readLoop()
-	log.Printf("opened worker conn (#%d in pool)", len(p.conns)+1)
+	log.Printf("opened worker conn (#%d in pool, send window %d, recv window %d)",
+		len(p.conns)+1, wc.sendWndInit, wc.recvWndInit)
 	return wc, nil
 }
 
@@ -101,6 +104,9 @@ type WorkerConn struct {
 	pool *WorkerPool
 	fc   *wire.FramedConn
 
+	sendWndInit int // hub's advertised per-stream receive window (our send budget)
+	recvWndInit int // our advertised per-stream receive window (bounds each recv queue)
+
 	mu      sync.Mutex
 	streams map[int]*Stream
 	nextSid int
@@ -140,6 +146,9 @@ func (wc *WorkerConn) removeStream(sid int) *Stream {
 	return st
 }
 
+// readLoop dispatches inbound mux frames. It must never block on a stream's
+// destination: DATA is only enqueued (the per-stream writeLoop does the actual
+// destination writes), so one slow destination cannot stall other streams.
 func (wc *WorkerConn) readLoop() {
 	for {
 		payload, err := wc.fc.ReadFrame()
@@ -160,9 +169,20 @@ func (wc *WorkerConn) readLoop() {
 			if st := wc.getStream(sid); st != nil {
 				st.deliverFromHub(r.Remaining())
 			}
-		case MuxFin, MuxRst:
+		case MuxWnd:
+			if delta, err := r.VarInt(); err == nil && delta > 0 {
+				if st := wc.getStream(sid); st != nil {
+					st.grantSendWnd(delta)
+				}
+			}
+		case MuxFin:
+			// Graceful: drain what is already queued to the destination first.
 			if st := wc.removeStream(sid); st != nil {
-				st.shutdown(false)
+				st.gracefulFin()
+			}
+		case MuxRst:
+			if st := wc.removeStream(sid); st != nil {
+				st.teardown(false)
 			}
 		default:
 			log.Printf("worker: unknown mux type %d", ftype)
@@ -178,7 +198,7 @@ func (wc *WorkerConn) readLoop() {
 	wc.streams = make(map[int]*Stream)
 	wc.mu.Unlock()
 	for _, st := range streams {
-		st.shutdown(false)
+		st.teardown(false)
 	}
 }
 
@@ -198,7 +218,16 @@ func (wc *WorkerConn) sendRst(sid int) {
 	_ = wc.fc.WriteFrame(wire.NewWriter().U8(MuxRst).VarInt(sid).Out())
 }
 
+func (wc *WorkerConn) sendWndUpdate(sid, delta int) {
+	_ = wc.fc.WriteFrame(wire.NewWriter().U8(MuxWnd).VarInt(sid).VarInt(delta).Out())
+}
+
 // Stream bridges one player (via the hub) to one destination connection.
+//
+// Data from the hub is queued and written to the destination by a dedicated
+// writeLoop goroutine. The queue is bounded by the advertised receive window —
+// the hub never sends more un-credited bytes, so overflow is a protocol
+// violation and resets the stream.
 type Stream struct {
 	wc      *WorkerConn
 	sid     int
@@ -207,25 +236,33 @@ type Stream struct {
 	srcIP   string
 	srcPort int
 
-	mu        sync.Mutex
+	mu         sync.Mutex
-	dest      net.Conn
+	cond       *sync.Cond
-	connected bool
+	dest       net.Conn
-	preBuf    []byte
+	connected  bool
-	closed    bool
+	closed     bool
+	finPending bool     // hub sent FIN; close the destination once the queue drains
+	q          [][]byte // hub -> destination, waiting for writeLoop
+	qBytes     int
+	sendWnd    int // flow control: budget for destination -> hub DATA
+	consumed   int // flow control: drained bytes not yet credited back to the hub
 }
 
 func newStream(wc *WorkerConn, sid int, cid []byte, m Mapping, ip string, port int) *Stream {
-	return &Stream{wc: wc, sid: sid, cid: cid, mapping: m, srcIP: ip, srcPort: port}
+	s := &Stream{wc: wc, sid: sid, cid: cid, mapping: m, srcIP: ip, srcPort: port, sendWnd: wc.sendWndInit}
+	s.cond = sync.NewCond(&s.mu)
+	return s
 }
 
-// run dials the destination, optionally writes the PROXY v2 header, flushes any
+// run dials the destination, optionally writes the PROXY v2 header, then pumps
-// buffered hub bytes, then pumps destination -> hub.
+// destination -> hub (respecting the stream send window when negotiated).
 func (s *Stream) run() {
 	dest, err := net.DialTimeout("tcp", s.mapping.Destination, 10*time.Second)
 	if err != nil {
 		log.Printf("stream %d: dial %s failed: %v", s.sid, s.mapping.Destination, err)
 		s.wc.removeStream(s.sid)
 		s.wc.sendRst(s.sid)
+		s.teardown(false)
 		return
 	}
 	if tcp, ok := dest.(*net.TCPConn); ok {
@@ -240,7 +277,6 @@ func (s *Stream) run() {
 		}
 	}
 
-	// Atomically flush pre-connect buffer and enable direct writes.
 	s.mu.Lock()
 	if s.closed {
 		s.mu.Unlock()
@@ -248,18 +284,18 @@ func (s *Stream) run() {
 		return
 	}
 	s.dest = dest
-	if len(s.preBuf) > 0 {
-		_, _ = dest.Write(s.preBuf)
-		s.preBuf = nil
-	}
 	s.connected = true
+	s.cond.Broadcast() // wake writeLoop: queued hub bytes can flow now
 	s.mu.Unlock()
 
 	// destination -> hub
-	buf := make([]byte, 32*1024)
+	buf := make([]byte, DataChunkSize)
 	for {
 		n, err := dest.Read(buf)
 		if n > 0 {
+			if !s.acquireSendWnd(n) {
+				break
+			}
 			if werr := s.wc.sendData(s.sid, buf[:n]); werr != nil {
 				break
 			}
@@ -268,7 +304,99 @@ func (s *Stream) run() {
 			break
 		}
 	}
-	s.shutdown(true)
+	s.teardown(true)
+}
+
+// writeLoop is the only writer to the destination. It drains the receive queue,
+// credits the hub as bytes land on the destination socket, and performs the
+// deferred graceful close when a FIN arrived with data still queued.
+func (s *Stream) writeLoop() {
+	for {
+		s.mu.Lock()
+		for !s.closed && (!s.connected || (len(s.q) == 0 && !s.finPending)) {
+			s.cond.Wait()
+		}
+		if s.closed {
+			s.mu.Unlock()
+			return
+		}
+		if len(s.q) == 0 { // finPending and fully drained
+			s.mu.Unlock()
+			s.teardown(false)
+			return
+		}
+		data := s.q[0]
+		s.q = s.q[1:]
+		s.qBytes -= len(data)
+		dest := s.dest
+		s.mu.Unlock()
+
+		if _, err := dest.Write(data); err != nil {
+			s.teardown(true)
+			return
+		}
+		s.credit(len(data))
+	}
+}
+
+// deliverFromHub enqueues hub bytes for the destination. Called from the worker
+// readLoop; it never blocks — a peer that exceeds the advertised window is a
+// protocol violator and gets the stream reset.
+func (s *Stream) deliverFromHub(data []byte) {
+	s.mu.Lock()
+	if s.closed || s.finPending {
+		s.mu.Unlock()
+		return
+	}
+	if s.qBytes+len(data) > s.wc.recvWndInit {
+		s.mu.Unlock()
+		log.Printf("stream %d: peer exceeded flow-control window; resetting", s.sid)
+		s.wc.removeStream(s.sid)
+		s.wc.sendRst(s.sid)
+		s.teardown(false)
+		return
+	}
+	s.q = append(s.q, data)
+	s.qBytes += len(data)
+	s.cond.Broadcast()
+	s.mu.Unlock()
+}
+
+// acquireSendWnd blocks until the stream may send n more bytes to the hub.
+// Returns false if the stream closed while waiting.
+func (s *Stream) acquireSendWnd(n int) bool {
+	s.mu.Lock()
+	defer s.mu.Unlock()
+	for !s.closed && s.sendWnd < n {
+		s.cond.Wait()
+	}
+	if s.closed {
+		return false
+	}
+	s.sendWnd -= n
+	return true
+}
+
+func (s *Stream) grantSendWnd(delta int) {
+	s.mu.Lock()
+	s.sendWnd += delta
+	s.cond.Broadcast()
+	s.mu.Unlock()
+}
+
+// credit accounts bytes drained to the destination and grants the hub more
+// window once half of our receive window has been consumed.
+func (s *Stream) credit(n int) {
+	s.mu.Lock()
+	s.consumed += n
+	if s.closed || s.consumed*2 < s.wc.recvWndInit {
+		s.mu.Unlock()
+		return
+	}
+	delta := s.consumed
+	s.consumed = 0
+	s.mu.Unlock()
+	s.wc.sendWndUpdate(s.sid, delta)
 }
 
 func (s *Stream) buildProxyHeader(dest net.Conn) []byte {
@@ -283,28 +411,29 @@ func (s *Stream) buildProxyHeader(dest net.Conn) []byte {
 	return BuildProxyV2(srcIP, s.srcPort, dstTCP.IP, dstTCP.Port)
 }
 
-// deliverFromHub writes bytes coming from the hub to the destination, buffering
+// finDrainTimeout bounds how long a FIN'd stream may keep draining its queue
-// until the destination connection is established.
+// into the destination, so a dead destination cannot hold the stream forever.
-func (s *Stream) deliverFromHub(data []byte) {
+const finDrainTimeout = 10 * time.Second
+
+// gracefulFin marks the hub-side close; writeLoop finishes the queue and then
+// tears the stream down.
+func (s *Stream) gracefulFin() {
 	s.mu.Lock()
-	if s.closed {
+	if s.closed || s.finPending {
 		s.mu.Unlock()
 		return
 	}
-	if !s.connected {
+	s.finPending = true
-		s.preBuf = append(s.preBuf, data...)
+	if s.dest != nil {
-		s.mu.Unlock()
+		_ = s.dest.SetWriteDeadline(time.Now().Add(finDrainTimeout))
-		return
 	}
-	dest := s.dest
+	s.cond.Broadcast()
 	s.mu.Unlock()
-	if _, err := dest.Write(data); err != nil {
-		s.shutdown(true)
-	}
 }
 
-// shutdown closes the stream; notifyHub sends a FIN to the hub when true.
+// teardown closes the stream immediately; notifyHub sends a FIN when true.
-func (s *Stream) shutdown(notifyHub bool) {
+// Idempotent; wakes every goroutine parked on the stream.
+func (s *Stream) teardown(notifyHub bool) {
 	s.mu.Lock()
 	if s.closed {
 		s.mu.Unlock()
@@ -312,6 +441,7 @@ func (s *Stream) shutdown(notifyHub bool) {
 	}
 	s.closed = true
 	dest := s.dest
+	s.cond.Broadcast()
 	s.mu.Unlock()
 
 	if dest != nil {

docs/architecture.md

@@ -154,25 +154,43 @@ connections (9 + 9 + 2), confirming the algorithm.
   simplicity and correctness.
 * **Client:** goroutine-per-concern. One goroutine reads each connection
   (control or worker); `WriteFrame` is mutex-serialized so many stream goroutines
-  can share a worker connection safely. A per-stream mutex guards the small
+  can share a worker connection safely. Each stream has two goroutines: `run`
-  "buffer until the destination is connected, then write directly" handoff so
+  pumps destination → hub, and `writeLoop` is the only writer to the
-  the forwarded handshake never races ahead of later bytes.
+  destination, draining a per-stream queue fed by the worker readLoop. The
+  readLoop itself never writes to a destination, so a stalled destination can
+  never block frame dispatch for other streams.
 
-## 6. Back-pressure
+## 6. Back-pressure & flow control
 
-There is no per-stream credit window. Flow is governed by TCP back-pressure on
+Two mechanisms operate at different granularities:
-each worker connection:
 
-* Hub → player: if a player socket's write queue fills, the hub pauses the
+* **Per-stream credit windows** (PROTOCOL.md §7.3; the windows are exchanged
-  worker connection socket and resumes on drain.
+  at session establishment): each stream direction has an independent byte
-* Destination → hub: the client's `WriteFrame` blocks when the worker socket is
+  budget equal to the receiver's advertised window (default 256 KiB). A sender
-  congested, which naturally stops the client reading the destination.
+  that exhausts a
+  stream's window pauses *only that stream's source* — the hub pauses the one
+  player socket, the client parks the one destination-reader goroutine. Credit
+  is granted back (`WND` frames, batched at half-window) as bytes are actually
+  written to the terminal socket. The result: a slow player or slow destination
+  jams its own stream at a bounded buffer size and nothing else. This is what
+  eliminates head-of-line blocking between streams.
+* **Aggregate TCP back-pressure** on each worker connection: when the shared
+  socket itself is congested (total bandwidth, not one stream), the hub parks
+  all sending players until it drains, and the client's `WriteFrame` blocks.
+  This is fair — when the pipe is genuinely full, everyone should slow down.
 
-The consequence is head-of-line blocking *within* a worker connection: one very
+The window also bounds memory: a stream can hold at most one window of
-slow player can stall other streams sharing that connection. `maxConn` spreads
+undelivered data per direction (the client's pre-connect handshake buffer is
-streams across connections to mitigate this. For interactive Minecraft traffic
+covered by the same bound).
-(small client→server packets, bursty server→client chunk data) this is a good
+
-trade for a near-zero-overhead mux.
+Per-stream flow control is mandatory: the hub rejects a session whose Rekey
+lacks the STREAM_FC flag, and the client rejects a hub that does not echo it —
+peers that predate the mechanism cannot connect at all.
+
+What remains (by design) is TCP-level head-of-line blocking: a lost packet on
+a worker connection stalls all its streams for one retransmit. That is inherent
+to mux-over-TCP; the connection pool is the mitigation, and a datagram
+transport (QUIC) would be the escape hatch if it ever matters.
 
 ## 7. Failure & recovery
 
@@ -190,7 +208,8 @@ trade for a near-zero-overhead mux.
 ## 8. Known limitations
 
 1. No AEAD — payload integrity/authenticity is not cryptographically guaranteed.
-2. No per-stream flow control (see §6).
+2. TCP-level head-of-line blocking within a worker connection (lost packets;
+   see §6) — per-stream flow control removes the application-level variant only.
 3. Single-event-loop hub (see §5) bounds throughput to one core.
 4. `Intent 18` is reserved but only stubbed (the hub logs and closes).
 5. Pattern ownership is last-writer-wins; two clients registering the identical

e2e/harness_test.go

@@ -129,6 +129,7 @@ type destMode int
 const (
 	modeEcho          destMode = iota // echo every post-handshake byte
 	modeEchoOnceClose                 // echo one read, then close the connection
+	modeBlackhole                     // accept but never read: immediate write back-pressure
 )
 
 type proxyInfo struct {
@@ -154,6 +155,7 @@ type mockDest struct {
 	mode       destMode
 	events     chan destEvent
 	connClosed chan struct{}
+	done       chan struct{}
 }
 
 func newMockDest(t *testing.T, mode destMode) *mockDest {
@@ -168,8 +170,12 @@ func newMockDest(t *testing.T, mode destMode) *mockDest {
 		mode:       mode,
 		events:     make(chan destEvent, 128),
 		connClosed: make(chan struct{}, 128),
+		done:       make(chan struct{}),
 	}
-	t.Cleanup(func() { _ = ln.Close() })
+	t.Cleanup(func() {
+		_ = ln.Close()
+		close(d.done)
+	})
 	go d.serve()
 	return d
 }
@@ -189,6 +195,10 @@ func (d *mockDest) handle(conn net.Conn) {
 		_ = conn.Close()
 		d.connClosed <- struct{}{}
 	}()
+	if d.mode == modeBlackhole {
+		<-d.done // hold the connection open without ever reading
+		return
+	}
 	br := bufio.NewReader(conn)
 
 	var ev destEvent

e2e/slowstream_test.go

@@ -0,0 +1,131 @@
+package e2e
+
+import (
+	crand "crypto/rand"
+	"fmt"
+	"net"
+	"testing"
+	"time"
+
+	"github.com/iceBear67/redapricot/client"
+	"github.com/iceBear67/redapricot/client/wire"
+)
+
+// echoRounds pushes payload through the tunnel `rounds` times on one player
+// connection, failing the test if any round stalls.
+func echoRounds(t *testing.T, hubAddr string, rounds, size int) {
+	t.Helper()
+	fast := dialPlayer(t, hubAddr, "mc.local")
+	defer fast.Close()
+	payload := make([]byte, size)
+	for i := range payload {
+		payload[i] = byte(i*13 + 5)
+	}
+	for i := 0; i < rounds; i++ {
+		playerEcho(t, fast, payload)
+	}
+}
+
+// TestSlowPlayerDoesNotStallOthers: a player that stops reading while megabytes
+// are echoed back to it must not stall another stream on the same worker
+// connection (maxConn=1 forces sharing). Before per-stream flow control, the
+// hub paused the whole worker socket once that player's write queue filled,
+// freezing every other stream's downstream data.
+func TestSlowPlayerDoesNotStallOthers(t *testing.T) {
+	const psk = "e2e-slowplayer"
+	port := freePort(t)
+	hubAddr := fmt.Sprintf("127.0.0.1:%d", port)
+	startHub(t, port, psk)
+	dest := newMockDest(t, modeEcho)
+	startClient(t, hubAddr, psk, 1, []client.Mapping{
+		{Pattern: "mc.local", Destination: dest.addr},
+	})
+
+	// Slow player: 4 MiB goes out, gets echoed back, and is never read. The
+	// write blocks once buffers fill; the error on test-end close is expected.
+	slow := dialPlayer(t, hubAddr, "mc.local")
+	defer slow.Close()
+	go func() {
+		_, _ = slow.Write(make([]byte, 4*1024*1024))
+	}()
+
+	// Let the slow stream jam: its flow-control window fills and stays full.
+	time.Sleep(1 * time.Second)
+
+	// The fast player shares the single worker conn and must still round-trip.
+	echoRounds(t, hubAddr, 10, 8*1024)
+}
+
+// TestSlowDestinationDoesNotStallOthers: a destination that never reads must
+// only stall its own stream. Before the async delivery queue, the client wrote
+// to destinations inline in the worker readLoop, so one blocked destination
+// froze every stream on the connection.
+func TestSlowDestinationDoesNotStallOthers(t *testing.T) {
+	const psk = "e2e-slowdest"
+	port := freePort(t)
+	hubAddr := fmt.Sprintf("127.0.0.1:%d", port)
+	startHub(t, port, psk)
+	dest := newMockDest(t, modeEcho)
+	hole := newMockDest(t, modeBlackhole)
+	startClient(t, hubAddr, psk, 1, []client.Mapping{
+		{Pattern: "mc.local", Destination: dest.addr},
+		{Pattern: "hole.local", Destination: hole.addr},
+	})
+
+	// This player's destination never reads: the client-side write jams after
+	// kernel buffers fill, with the stream's queue bounded by its window.
+	stuck := dialPlayer(t, hubAddr, "hole.local")
+	defer stuck.Close()
+	go func() {
+		_, _ = stuck.Write(make([]byte, 2*1024*1024))
+	}()
+
+	time.Sleep(1 * time.Second)
+
+	echoRounds(t, hubAddr, 10, 8*1024)
+}
+
+// TestLegacyClientRejected: per-stream flow control is mandatory. A client that
+// performs the old session establishment — a Rekey message without the trailing
+// feature flags — must be closed by the hub before SessionReady.
+func TestLegacyClientRejected(t *testing.T) {
+	const psk = "e2e-legacyreject"
+	port := freePort(t)
+	hubAddr := fmt.Sprintf("127.0.0.1:%d", port)
+	startHub(t, port, psk)
+
+	conn, err := net.DialTimeout("tcp", hubAddr, 5*time.Second)
+	if err != nil {
+		t.Fatalf("dial hub: %v", err)
+	}
+	defer conn.Close()
+
+	pskBytes := []byte(psk)
+	hs := wire.BuildHandshake(767, wire.PSKAddress(pskBytes), 25565, 17)
+	if _, err := conn.Write(hs); err != nil {
+		t.Fatalf("handshake: %v", err)
+	}
+	fc := wire.NewFramedConn(conn,
+		wire.CipherFor(pskBytes, wire.DirS2C),
+		wire.CipherFor(pskBytes, wire.DirC2S),
+	)
+	rnd := make([]byte, 16)
+	if _, err := crand.Read(rnd); err != nil {
+		t.Fatal(err)
+	}
+	// Pre-flow-control Rekey: Magic|RandLen|Rand|Timestamp with no flags.
+	legacyRekey := wire.NewWriter().
+		U8(0x01). // control-session magic
+		VarInt(len(rnd)).
+		Bytes(rnd).
+		I64(time.Now().UnixMilli()).
+		Out()
+	if err := fc.WriteFrame(legacyRekey); err != nil {
+		t.Fatalf("rekey: %v", err)
+	}
+
+	_ = conn.SetReadDeadline(time.Now().Add(10 * time.Second))
+	if payload, err := fc.ReadFrame(); err == nil {
+		t.Fatalf("expected the hub to close a legacy session, got frame %v", payload)
+	}
+}

server/config.example.json

@@ -2,5 +2,6 @@
   "listen": "0.0.0.0:25565",
   "psk": "change-me-to-a-long-random-passphrase",
   "timestampWindowMs": 30000,
-  "pendingTimeoutMs": 10000
+  "pendingTimeoutMs": 10000,
+  "streamWindowBytes": 262144
 }

server/src/main/java/io/icybear/redapricot/Config.java

@@ -11,7 +11,8 @@ public record Config(
         int port,
         String psk,
         long timestampWindowMs,
-        long pendingTimeoutMs
+        long pendingTimeoutMs,
+        int streamWindowBytes
 ) {
     public static Config load(Path file) throws Exception {
         JsonObject json = new JsonObject(Files.readString(file));
@@ -25,11 +26,15 @@ public record Config(
         String psk = json.getString("psk");
         if (psk == null || psk.isEmpty()) throw new IllegalArgumentException("psk is required");
 
+        int window = json.getInteger("streamWindowBytes", Protocol.DEFAULT_STREAM_WINDOW);
+        window = Math.max(Protocol.MIN_STREAM_WINDOW, Math.min(Protocol.MAX_STREAM_WINDOW, window));
+
         return new Config(
                 host,
                 port,
                 psk,
                 json.getLong("timestampWindowMs", 30_000L),
-                json.getLong("pendingTimeoutMs", 10_000L));
+                json.getLong("pendingTimeoutMs", 10_000L),
+                window);
     }
 }

server/src/main/java/io/icybear/redapricot/HubConnection.java

@@ -4,6 +4,7 @@ import io.icybear.redapricot.crypto.Crypto;
 import io.icybear.redapricot.net.EncryptedFrames;
 import io.icybear.redapricot.util.Hex;
 import io.icybear.redapricot.util.ProtoReader;
+import io.icybear.redapricot.util.ProtoWriter;
 import io.icybear.redapricot.util.VarInt;
 import io.vertx.core.buffer.Buffer;
 import io.vertx.core.net.NetSocket;
@@ -145,6 +146,26 @@ public final class HubConnection {
             return;
         }
 
+        // Mandatory trailing feature flags: the client must offer per-stream flow
+        // control and advertise its receive window. Anything else is an
+        // unsupported (pre-flow-control) peer and is rejected.
+        int flags;
+        int peerWindow;
+        try {
+            flags = r.readVarInt();
+            peerWindow = r.readVarInt();
+        } catch (RuntimeException e) {
+            LOG.warn("{} rekey without feature flags (unsupported client version); closing", id);
+            frames.close();
+            return;
+        }
+        if ((flags & Protocol.FLAG_STREAM_FC) == 0 || peerWindow <= 0) {
+            LOG.warn("{} client did not offer per-stream flow control; closing", id);
+            frames.close();
+            return;
+        }
+        peerWindow = Math.min(peerWindow, Protocol.MAX_STREAM_WINDOW);
+
         // REKEY = Rand || Timestamp(I64 big-endian). Magic is excluded.
         byte[] rekey = new byte[randLen + 8];
         System.arraycopy(rand, 0, rekey, 0, randLen);
@@ -157,7 +178,12 @@ public final class HubConnection {
         frames.switchCiphers(
                 Crypto.decryptCipher(rekey, Crypto.DIR_C2S),
                 Crypto.encryptCipher(rekey, Crypto.DIR_S2C));
-        frames.send(new byte[]{(byte) Protocol.CTL_SESSION_READY});
+        // Echo the accepted flags plus our own receive window.
+        frames.send(new ProtoWriter()
+                .u8(Protocol.CTL_SESSION_READY)
+                .varInt(Protocol.FLAG_STREAM_FC)
+                .varInt(hub.config.streamWindowBytes())
+                .toBytes());
 
         if (magic == Protocol.MAGIC_CONTROL) {
             ControlSession session = new ControlSession(hub, frames, id);
@@ -165,10 +191,10 @@ public final class HubConnection {
             closeCleanup = session::onClose;
             LOG.info("{} control session established", id);
         } else if (magic == Protocol.MAGIC_WORKER) {
-            WorkerConn worker = new WorkerConn(hub, frames, id);
+            WorkerConn worker = new WorkerConn(hub, frames, id, peerWindow, hub.config.streamWindowBytes());
             frames.setHandler(worker::onFrame);
             closeCleanup = worker::onClose;
-            LOG.info("{} worker conn established", id);
+            LOG.info("{} worker conn established (peer window {})", id, peerWindow);
         } else {
             LOG.warn("{} bad magic {}; closing", id, magic);
             frames.close();

server/src/main/java/io/icybear/redapricot/Protocol.java

@@ -31,6 +31,16 @@ public final class Protocol {
     public static final int MUX_DATA = 0x01;
     public static final int MUX_FIN = 0x02;
     public static final int MUX_RST = 0x03;
+    public static final int MUX_WND = 0x04; // per-stream flow-control credit grant
+
+    // Session-establishment feature flags (trailing VarInt on the Rekey message,
+    // echoed after the SessionReady type byte when accepted).
+    public static final int FLAG_STREAM_FC = 0x01;
+
+    // Per-stream flow-control window bounds (bytes).
+    public static final int DEFAULT_STREAM_WINDOW = 256 * 1024;
+    public static final int MIN_STREAM_WINDOW = 32 * 1024;
+    public static final int MAX_STREAM_WINDOW = 8 << 20;
 
     // Any redapricot connection
     public static final int FRAME_ERROR = 0x7F;

server/src/main/java/io/icybear/redapricot/WorkerConn.java

@@ -17,20 +17,44 @@ import java.util.Set;
 /**
  * An authenticated worker connection (Magic 0x02). Multiplexes many player
  * streams; the client opens streams via SYN(CID) to take over pending players.
+ *
+ * <p>Every stream has a credit window in both directions (PROTOCOL.md §7.3),
+ * so one slow player only ever stalls its own stream — the shared worker
+ * socket is never paused because of a single stream.
  */
 @RequiredArgsConstructor
 public final class WorkerConn {
     private static final Logger LOG = LogManager.getLogger("redapricot.worker");
 
+    /** Cap on a single DATA frame so no stream monopolizes the shared link for long. */
+    private static final int CHUNK = 32 * 1024;
+
     private final Hub hub;
     private final EncryptedFrames frames;
     private final String id;
-    private final Map<Integer, NetSocket> streams = new HashMap<>();
+    private final int sendWndInit; // client's advertised per-stream receive window (our send budget)
+    private final int recvWndInit; // our advertised per-stream receive window (basis for credit grants)
 
-    // Backpressure for the single shared worker socket, arbitrated across all streams.
+    private final Map<Integer, StreamState> streams = new HashMap<>();
-    private final Set<NetSocket> upstreamPaused = new HashSet<>();   // players parked until the worker write queue drains
+
-    private final Set<Integer> downstreamBlocked = new HashSet<>();  // sids whose player write queue is full; non-empty => worker read paused
+    // Aggregate backpressure for the single shared worker socket: players parked
-    private boolean workerDrainArmed = false;                        // whether the worker socket's single drainHandler is set
+    // until its write queue drains. Per-stream fairness is the credit windows'
+    // job; this only reacts to the whole pipe being congested.
+    private final Set<StreamState> upstreamPaused = new HashSet<>();
+    private boolean workerDrainArmed = false; // whether the worker socket's single drainHandler is set
+
+    /** Per-stream flow-control bookkeeping. */
+    private final class StreamState {
+        final NetSocket player;
+        int sendWnd = sendWndInit;   // budget for player -> client DATA
+        Buffer pendingUp;            // player bytes awaiting send window (player is paused meanwhile)
+        boolean pausedForWindow;
+        int credited;                // client -> player bytes flushed but not yet granted back
+
+        StreamState(NetSocket player) {
+            this.player = player;
+        }
+    }
 
     public void onFrame(byte[] payload) {
         ProtoReader r = new ProtoReader(payload);
@@ -39,6 +63,7 @@ public final class WorkerConn {
         switch (type) {
             case Protocol.MUX_SYN -> handleSyn(sid, r.readBytes(Protocol.CID_LEN));
             case Protocol.MUX_DATA -> handleData(sid, r.readBuffer(r.remaining()));
+            case Protocol.MUX_WND -> handleWnd(sid, r.readVarInt());
             case Protocol.MUX_FIN, Protocol.MUX_RST -> closeStream(sid);
             case Protocol.FRAME_ERROR -> LOG.warn("worker {} error frame", id);
             default -> LOG.warn("worker {} unknown mux type {}", id, type);
@@ -53,72 +78,126 @@ public final class WorkerConn {
             return;
         }
         NetSocket player = p.getSocket();
-        streams.put(sid, player);
+        StreamState st = new StreamState(player);
+        streams.put(sid, st);
 
         // From now on the player socket belongs to this stream.
         player.handler(buf -> {
-            sendData(sid, buf.getBytes());
+            sendUpstream(sid, st, buf);
-            if (frames.writeQueueFull()) {
+            checkAggregate(st);
-                player.pause();
-                upstreamPaused.add(player);
-                armWorkerDrain();
-            }
         });
-        player.closeHandler(v -> onPlayerGone(sid, player));
+        player.closeHandler(v -> onPlayerGone(sid, st));
-        player.exceptionHandler(t -> onPlayerGone(sid, player));
+        player.exceptionHandler(t -> onPlayerGone(sid, st));
 
         // Forward the buffered handshake (and any pipelined bytes), then resume.
-        sendData(sid, p.getBuffered().getBytes());
+        sendUpstream(sid, st, p.getBuffered());
-        player.resume();
+        if (!st.pausedForWindow) player.resume();
+        checkAggregate(st);
         LOG.info("worker {} stream {} bound to {}", id, sid, p.getPattern());
     }
 
-    private void handleData(int sid, Buffer data) {
+    /**
-        NetSocket player = streams.get(sid);
+     * Send player bytes to the client, chunked and clipped to the stream window;
-        if (player == null) return;
+     * the overflow is parked in {@code pendingUp} and the player socket paused
-        player.write(data);
+     * until the client grants more credit.
-        // A slow player pauses the shared worker read side; the block set lets us resume only
+     */
-        // once every blocked player has drained (and release it if a player disconnects meanwhile).
+    private void sendUpstream(int sid, StreamState st, Buffer buf) {
-        if (player.writeQueueFull() && downstreamBlocked.add(sid)) {
+        if (st.pendingUp != null) { // still waiting for window; keep ordering
-            if (downstreamBlocked.size() == 1) frames.socket().pause();
+            st.pendingUp.appendBuffer(buf);
-            player.drainHandler(v -> unblockDownstream(sid));
+            return;
         }
+        int off = drainUpstream(sid, st, buf, 0);
+        if (off < buf.length()) {
+            st.pendingUp = buf.getBuffer(off, buf.length());
+            if (!st.pausedForWindow) {
+                st.pausedForWindow = true;
+                st.player.pause();
+            }
+        }
+    }
+
+    /** Send from {@code buf[off..]} within the stream window, chunked; returns the new offset. */
+    private int drainUpstream(int sid, StreamState st, Buffer buf, int off) {
+        while (off < buf.length() && st.sendWnd > 0) {
+            int n = Math.min(Math.min(CHUNK, st.sendWnd), buf.length() - off);
+            sendData(sid, buf.getBytes(off, off + n));
+            st.sendWnd -= n;
+            off += n;
+        }
+        return off;
+    }
+
+    /** The client granted {@code delta} more bytes of credit on a stream. */
+    private void handleWnd(int sid, int delta) {
+        StreamState st = streams.get(sid);
+        if (st == null || delta <= 0) return;
+        st.sendWnd += delta;
+        if (st.pendingUp != null) {
+            Buffer pending = st.pendingUp;
+            int off = drainUpstream(sid, st, pending, 0);
+            st.pendingUp = off >= pending.length() ? null : pending.getBuffer(off, pending.length());
+        }
+        if (st.pendingUp == null && st.pausedForWindow) {
+            st.pausedForWindow = false;
+            if (!upstreamPaused.contains(st)) st.player.resume();
+        }
+        checkAggregate(st);
+    }
+
+    private void handleData(int sid, Buffer data) {
+        StreamState st = streams.get(sid);
+        if (st == null) return;
+        // Never pause the shared socket: the client bounds what it sends per
+        // stream to our advertised window, so a slow player only piles up a
+        // bounded amount in its own write queue; credit is granted back as the
+        // write completes (i.e. the bytes reached the player socket).
+        int len = data.length();
+        st.player.write(data).onComplete(ar -> {
+            if (ar.failed() || frames.isClosed() || streams.get(sid) != st) return;
+            st.credited += len;
+            if (st.credited * 2 >= recvWndInit) {
+                int delta = st.credited;
+                st.credited = 0;
+                sendWnd(sid, delta);
+            }
+        });
     }
 
     private void closeStream(int sid) {
-        NetSocket player = streams.remove(sid);
+        StreamState st = streams.remove(sid);
-        unblockDownstream(sid);
+        if (st != null) {
-        if (player != null) {
+            upstreamPaused.remove(st);
-            upstreamPaused.remove(player);
+            st.player.close();
-            player.close();
         }
     }
 
-    /** Register (once) the shared worker socket's single drain handler; on drain, wake every parked player. */
+    /** Park the player if the shared worker socket's write queue is congested. */
+    private void checkAggregate(StreamState st) {
+        if (frames.writeQueueFull() && upstreamPaused.add(st)) {
+            st.player.pause();
+            armWorkerDrain();
+        }
+    }
+
+    /** Register (once) the shared worker socket's single drain handler; on drain, wake parked players. */
     private void armWorkerDrain() {
         if (workerDrainArmed) return;
         workerDrainArmed = true;
         frames.socket().drainHandler(v -> {
             workerDrainArmed = false;
             if (upstreamPaused.isEmpty()) return;
-            NetSocket[] parked = upstreamPaused.toArray(new NetSocket[0]);
+            StreamState[] parked = upstreamPaused.toArray(new StreamState[0]);
             upstreamPaused.clear();
-            for (NetSocket pl : parked) pl.resume();
+            for (StreamState st : parked) {
+                if (!st.pausedForWindow) st.player.resume();
+            }
         });
     }
 
-    /** A blocked player drained or vanished: drop its downstream block, resuming the shared worker read side when none remain. */
-    private void unblockDownstream(int sid) {
-        if (downstreamBlocked.remove(sid) && downstreamBlocked.isEmpty()) {
-            frames.socket().resume();
-        }
-    }
-
     /** The player side of a stream vanished: drop it from every table, release any backpressure it held, and FIN the peer if still live. */
-    private void onPlayerGone(int sid, NetSocket player) {
+    private void onPlayerGone(int sid, StreamState st) {
-        boolean wasLive = streams.remove(sid) != null;
+        boolean wasLive = streams.remove(sid) == st;
-        upstreamPaused.remove(player);
+        upstreamPaused.remove(st);
-        unblockDownstream(sid);
         if (wasLive) sendFin(sid);
     }
 
@@ -134,10 +213,13 @@ public final class WorkerConn {
         frames.send(new ProtoWriter().u8(Protocol.MUX_RST).varInt(sid).toBytes());
     }
 
+    private void sendWnd(int sid, int delta) {
+        frames.send(new ProtoWriter().u8(Protocol.MUX_WND).varInt(sid).varInt(delta).toBytes());
+    }
+
     public void onClose() {
-        for (NetSocket player : streams.values()) player.close();
+        for (StreamState st : streams.values()) st.player.close();
         streams.clear();
-        downstreamBlocked.clear();
         upstreamPaused.clear();
         LOG.info("worker {} closed", id);
     }

server/src/test/java/io/icybear/redapricot/CryptoCodecTest.java

@@ -77,7 +77,7 @@ class CryptoCodecTest {
 
     /** A Hub whose event loop is never touched (register/match/normalize use no Vert.x state). */
     private static Hub testHub() {
-        return new Hub(null, new Config("0.0.0.0", 25565, "test-psk", 30_000L, 10_000L));
+        return new Hub(null, new Config("0.0.0.0", 25565, "test-psk", 30_000L, 10_000L, Protocol.DEFAULT_STREAM_WINDOW));
     }
 
     private static ControlSession testSession(Hub hub, String id) {